Automatic flush bolt OLDA 43 HZA-20T

Automatic, single-action flush bolt for non-spring-loaded bolting of the passive door leaf in double doors.

To be recessed into doors of wood, steel, or aluminum profiles. Both up and/or down on the edge of passive door leaves.

1
Documents & files View variations

Buy online

Quantity

See our resellers for this product

Description

OLDA 43 HZA-20T is bolted and unbolted automatically and has a bolt diameter of 12 mm, a backset of 20 mm (22 mm with forend), and a forend width of 24 mm.

The basic version of this product has a bolt with a length of 30 mm. An alternative version with a bolt length of 60 mm and increased adjustability is also available, which makes it possible to use it also when there is a large gap between the door leaf and frame or sill, or when a sill is not fitted. It is also suitable for integration with automatic drop seals etc.

Manufactured in steel. Coating: electro-zinc plating.

Installation:
OLDA 43 HZA-20T is fitted recessed in the edge of the door, either flush, with cut-out, or without cut-out for the forend.

Fixed with two screws.

OLDA type 1 automatic flush bolt is fitted upper right and lower left in the passive door leaf.

OLDA type 2 automatic flush bolt is fitted lower right and upper left in the passive door leaf.

Variations

Item noMaterialSurface treatmentNoteStock
934653SteelZinc platedType 1Log in to see stock status
934663SteelZinc platedType 2Log in to see stock status
Shopping Cart