RG-504 Glass wall profile
A high glass fitting profile, 60 x 27 mm, often used for floor attachment as it protects the glass from being damaged by vacuum cleaners and such.
RG-504 can also be used for ceiling and wall mounting.
Buy online
See our resellers for this product
Description
Glass wall profile, 60 x 27 mm for glass walls with or without sliding doors, swing doors, or together with the RG-580 Decibel door frame. The sharp edges allow for a 90° installation.
- The RG-502 is a split profile for easy installation
- The RG-503 is a fixed profile often used for attachment to the ceiling
- The RG-504 is perfect for floor mounting as it is higher than the other profiles
Whether to use a fixed or split profile depends on the ability to slide the glass laterally during installation. Usually, a fixed profile is attached to the ceiling and split on the floor and vertically.
The profiles are sold in lengths of 5 200 mm or 2 600 mm.
An RG-512 end cap, an RG-520 rubber gasket, and an RG-521 wedge gasket for selected glass thickness (8 – 12.76 mm) are enclosed.
Accessories
-
RG-514 Endplate
Material: Aluminum/Stainless steel (A2), Surface treatment: BlackRG-514 Endplate
Material: Aluminum/Stainless steel (A2), Surface treatment: Anodized naturalRG-520 Base gasket
A base rubber gasket to be mounted inside our aluminum profiles RG-501 - 510 and the RG-580 Decibel aluminum frames for a safe and steady glass wall installation.Select optionsShow More AccessoriesRG-521 Wedge gasket
A wedge gasket in sturdy rubber for our glass wall aluminum profile systems RG-501 - RG-510, and RG-580 Decibel aluminum frame. The wedge gasket is applied between the glass and the aluminum profile to secure and stabilize the glass.Select optionsVariations