W38L Linked Windscreen Wiper motor
A linked wiper system where one motor runs two W12 wiper arms. With this system, you can design a very efficient wiper system with an overlapping sweep.
Buy online
See our resellers for this product
Description
The W38L linked wiper system is designed for heavy-duty applications.
- Torque 38Nm torque
- Powers up to 610 mm / 560 mm arms and blades
- Easily adjusted sweep angle 45 – 110° for maximum visibility
- Possible to have an overlapping sweep
- Dynamic parking can be changed from Left to Right
- Two speeds: 35 sweeps/min and 55 sweeps/min
- Voltage Input: 12 or 24VDC
- EMC protected
- Insulated ground for metal, GRP, and wooden boats
- Pantograph or pendulum arms
- L3 = 160 – 450 (750) mm*
*) With extension tube - L4 = L3 – 100 mm
- A1 = 45 – 110°
- A2 = 10 – 110°
IMPORTANT:
The threaded rod M8 is crucial for the W38L motor to work and must be ordered separately.
When mounting a parallel arm in a linked W38L system, the Plate and shaft W38L are needed and must be ordered separately.
Accessories
-
Plate and shaft for W38L
This plate with a shaft is a necessary accessory when installing a parallel arm in a linked W38L wiper system.Select options
Threaded rod M8 – Wiper linkage system
The threaded rod in stainless steel is the link between the two shafts in our W38L boat windshield wiper system.Select optionsShow More Accessories
Extension tube
Extension tube in stainless steel for the W38L boat windshield wiper system. CC-measure 450-750 mm.Select options
Variations
Related products
-
Wiper control for 1 motor
Small and reliable wiper control for 1 wiper motor that can be used with all ROCA wipers. The control is supplied with switch and cable. All functions can be operated with the single switch.Select options
W10 & W12 Spray kit for arms
A spray kit for mounting on wiper arms within our wiper motor systems W10 and W12.Select options
Wiper control
A wiper control for a synchronized sweep of 2 or 3 ROCA wiper motors. All functions can be smoothly operated with only one switch.Select options
Pantograph arm, slim
This is a slim stainless steel pantograph arm with a J-hook connection. The slim design enables higher visibility. The wiper arm fits our wiper motors W10, W12, and W38L.Select options
Wiper arm – standard
A black windshield wiper arm in stainless steel for the wiper motors W10 and W12.Select options
Pantograph arm
Pantograph windshield wiper arm in electropolished or black-painted stainless steel.Select options
Wiper arm with adjustable tip
Wiper arm with an adjustable tip for our wiper systems W10 and W12. Available in black or electropolished stainless steel.Select options