W38 Windscreen wiper motor, single drive
The W38 wiper motor is made for bigger windshields where you need a longer wiper arm.
This windshield wiper motor is suitable for the toughest conditions and can easily be adjusted from 45° – 110° for maximum visibility.
Buy online
See our resellers for this product
Description
- Torque: 38 Nm
- Powers up to 900 mm / 35” arms and blades
- Two speeds: 35 sweeps/min and 55 sweeps/min
- Easily adjustable sweep angle 45 – 110°
- Voltage Input: 12 or 24 VDC
- EMC protected
- Driveshaft in stainless steel
- Insulated ground for metal, GRP, and wooden boats.
- Pantograph or pendulum arms
Accessories
-
W25 & W38 Wiper arm – Adjustable tip
A stainless steel pendulum wiper arm with adjustable tip. Fits our W25 and W38 wiper motors.Select options
Wiper blade
A windshield wiper blade in natural rubber and stainless steel with anti-glare painting. Suitable for ROCA wiper arms with a saddle width of 16 mm.Select options
Wiper blade zinc-plated steel
A wiper blade made of black painted zinc-plated steel. Natural rubber profile with stainless steel backer, including two adaptors to fit wiper arms with straight connection or J-hook connection.Select optionsShow More Accessories
W25 & W38S Pantograph arm
A pantograph arm for our W25 and W38S windshield wipers. Slim and elegant design in electropolished or black stainless steel.Select optionsVariations
Related products
-
W38 Windscreen Wiper motor, dual drive
The W38 wiper system is strong and flexible and made for the toughest conditions. This windshield wiper motor enables the biggest sweep range possible for the very big front windows on a modern boat.Select options
Wiper control for 1 motor
Small and reliable wiper control for 1 wiper motor that can be used with all ROCA wipers. The control is supplied with switch and cable. All functions can be operated with the single switch.Select options
Wiper control system
A wiper control system for 2, 3, 4, or 5 wiper motors. With the microcontroller-based control panel you can operate each wiper separately.Select options